Eventide BD600+ handleiding
Handleiding
Je bekijkt pagina 57 van 64
Appendix F BD600W+ WheatNet-IP
BD600+ Profanity Delay Appendix F WheatNet-IP Page 53
Document Version 2.3
Changing the IP Address
The default IP (Internet Protocol) address for the BD600W+is 192.168.87.239. You may need to change
this value if it clashes with another piece of connected equipment, for example if you have more than one
BD600+W. The IP address for any piece of equipment must be unique - if you need to change it, obtain a
suitable value from your Network Administrator.
To change the IP address you will need an internet connection to the BD600W+and a software application
that can log onto it using the Telnet protocol. Again, your Network Administrator can assist. You will need
the current IP address to log on to it – this is displayed at BD600W+power up.
When the connection is made, you will see:
Wheatstone Telnet Server
Copyright 2012, Wheatstone Corp.
Ctrl-D - Exit
Ctrl-E - Toggle Echo
Please log in...
Username:
Enter “wheatstone” when prompted for Username, followed by the Enter key, and when prompted for Pass-
word, hit the Enter key without any text to enter a blank password. At this point, you should see something
like:
WheatNet IP Eventide BD600+ Software Version 1.4.9
Built Jun 15 2015 at 10:58:25
Booter ver:0.0 type:000003 dip:0000
FPGA ver:000A0002
Device Type: Eventide
For a command menu, type "help"
->
Once you see this, enter the following at the “->” prompt:
ip <ip address> <subnet mask> <gateway> <Enter Key>
Where:
<ip address> is the desired new IP address, example 192.168.87.240
<subnet mask> is usually 255.255.255.0
<gateway> is usually 192.168.87.1 (confirm with Network Administrator).
As an example, to set the above IP address, the command to enter is:
ip 192.168.87.240 255.255.255.0 192.168.87.1
Once the command is recognized, it will prompt you to reboot:
Reboot required to implement changes
Bekijk gratis de handleiding van Eventide BD600+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eventide |
| Model | BD600+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3523 MB |