Eventide BD600+ handleiding
Handleiding
Je bekijkt pagina 54 van 64
Appendix F BD600W+ WheatNet-IP
Page 50 Appendix F WheatNet-IP BD600+ Profanity Delay
Document Version 2.3
WheatNet-IP is a product of the Wheatstone Corporation, which allows multiple pieces of audio equip-
ment to pass audio and control signals over a Gigabit Ethernet network. The BD600W+can be con-
nected to a WheatNet-IP network, usually as a slave of a "Blade." It should be noted that most net-
working issues are beyond the scope of this manual, and should be addressed directly to Wheatstone
Technical Support.
Connecting the BD600W+to a WheatNet-IP Network
To add a BD600W+to a WheatNet-IP network, you will need at least one Wheatstone Blade attached
to the network. This is because the BD600W+acts as a “slave” to the Blade. Before connecting the
BD600W+you will need its IP (Internet Protocol) address – this defaults to 192.168.87.239, and is dis-
played during the BD600+W’s startup sequence. The system can be configured by using Wheatstone’s
WheatNet-IP Navigator application, shown below.
First connect your BD600W+to the WheatNet-IP system using a suitable
network cable – this will probably connect to a Gigabit switch which is part
of your network.
The BD600W+is viewed as a “3
rd
Party Device” - to add it to the system,
click on the “3
rd
Party Devices” tab. This will show the window above.
Click the “Add…” button, and enter a suitable name and the BD600+W’s
IP address.
Leave the “TCP Port” and “Host Blade” values alone.
Bekijk gratis de handleiding van Eventide BD600+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eventide |
| Model | BD600+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3523 MB |