Eurolite LED KLS Laser Bar FX AIR handleiding

Verlichting

Eurolite

52 pagina's

PDF beschikbaar

Handleiding

00161181, Version 1.0

41/52

Notes:

(1) The remote Control will not respond to any inputs when Freeze or Black Out is activated. If the remote

does not respond when a button is pressed, try pressing Freeze or Black Out. Freeze or Black Out may

have been inadvertently activated.

(2) Press the Freeze button for 5 seconds to reset all remote control settings. However, your user settings

Fav1, Fav2, Fav3 are retained.

(3) The remote control does not work in DMX mode.

Battery

If the range of the remote control decreases, replace the battery. For this purpose, remove the battery

compartment cover on the back of the remote control and remove the used battery. For operation, one 12 V

23AE alkaline manganese battery is required. When inserting, pay attention that the battery is inserted in the

correct position.

FOOT SWITCH

The optional wireless foot switch operates at 433 MHz over a distance of up to 30 meters (line-of-sight). The

foot switch must be enabled in the system settings (default).

Control options

Call up menu item SYS > FOOT. Select one of the following three settings:

• PUBL = the fixture responds to all RF signals from foot switches

in this series

• BIND = the fixture is paired with a single foot switch so that other foot switches cannot intervene

• OFF = the fixture cannot be controlled by foot switch.

If you select the BIND option, the remote control must then be paired. The display flashes. Now press and

hold the "Blackout" button on the remote control to pair until the display shows "succ".

Operation

1 Insert a 9 V battery into the battery compartment at the bottom. The POWER indicator at the top will light

up. When pressing a pedal, the TRANSMITTER indicator will light up for confirmation.

2 Press pedal AUTO repeatedly to switch between the show programs in automatic mode. They will be

indicated in the display.

3 Press pedal MUSIC repeatedly to switch between the show programs in sound-controlled mode. They

will be indicated in the display.

4 Press pedal COLOR to select the colors for color mode. The spots will constantly emit the color

adjusted.

5 Press pedal BLACKOUT to switch off lights. Press the pedal again to turn the lights back on. If you want

to pause the programs instead, select the FREE setting in the SYS > F-BL menu.

Notes:

(1) The foot switch will not respond to any inputs when Freeze or Black Out is activated. If the remote does

not respond when a button is pressed, try pressing Freeze or Black Out. Freeze or Black Out may have

been inadvertently activated.

(2) The foot switch does not work in DMX mode.

COLORAUTO MUSIC

BLACKOUT

POWERTRANSMITTER

Bekijk gratis de handleiding van Eurolite LED KLS Laser Bar FX AIR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.