Eurolite LED KLS Laser Bar FX AIR handleiding

Verlichting

Eurolite

52 pagina's

PDF beschikbaar

Handleiding

00161181, Version 1.0

35/52

MOUNTING ON A STAND

For mobile use, place the light set on a lighting stand via the stand sleeve and fasten the fixation screw.

Suitable stands can be found in the section Accessories.

Notes:

• Please make sure the load is installed in a balanced way and the carrying capacity of the stand is not

exceeded.

• Install the stand on a plane area (inclination angle max. 5°) and out of the reach of people.

• Depending upon the individual installation spot, all necessary measures against movement and for

securing the standing safety have to be created (also in case of fire).

POWER SUPPLY

The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.

1 Connect the device via the mains cable to a grounded mains socket.

2 Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains

outlet which is switchable.

3 The jack POWER OUT allows for power supply of further devices. To interconnect several devices,

connect the jack POWER OUT to the input POWER IN of the next unit until all units are connected. In

this manner, up to 8 devices can be linked at 230/240 input voltage and up to 4 devices at 110/115 input

voltage.

Bekijk gratis de handleiding van Eurolite LED KLS Laser Bar FX AIR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.