Eurolite LED Compact Multi FX Laser Bar handleiding

Verlichting

Eurolite

40 pagina's

PDF beschikbaar

Handleiding

00137589.DOCX, Version 1.0

31/40

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating

mode. The operating modes can be selected by means of the display and the control buttons. All settings

remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone

mode via the control board and the EUROLITE IR-16 remote control or in DMX-controlled mode via any

commercial DMX controller.

Operating buttons

Selects the operating mode or returns to the initial screen.

ENTER

Activates a value to be modified or saves a value when modifying.

Selects the next menu item or increases values when modifying.

DOWN

Selects the previous menu item or decreases values when modifying.

Menu structure

Default settings in grey

Display Function

AUT

AU01 – Au14 Auto programs (Master mode)

S.01-S.80-S.100 Speed (increasing)

SOU

SO01 – SO14 Sound controlled programs (Master mode)

DMX

dXXX

2CH

5CH

8CH

10CH

d 001-d 511

d 001-d 508

d 001-d 505

d 001-d 503

Setting DMX channel mode

DMX address setting

2-Channel DMX Mode

5-Channel DMX Mode

8-Channel DMX Mode

10-Channel DMX Mode

SLA

Slav

Setting for the Slave device

SYS

LEDS *

OFF

Display energy saving mode on

Display energy saving mode off

LEDr

OFF

Display setting

With this function you can to turn the display upside down

SOUN

LAST

Most recent light effect is held; Laser off

oFF

LEDs are switched off

REST

YES

Restore factory default

* = When ON, the display shows a dot after 30 seconds of inactivity

Stand-alone mode

Operation without external control

In automatic mode, 14 show programs are available that run at an adjustable speed or sound-controlled via

the built-in microphone, if desired.

Automatic mode

1 Press the button MENU so many times until AUT appears on the display and confirm with ENTER. The

LED indicating automatic mode next to the display will light up.

2 Use the buttons UP and DOWN to select the number of the desired program (AU01-AU14).

3 Confirm with the ENTER button. The display indicates menu item running speed.

4 Use the buttons UP and DOWN to adjust the running speed of the program from S.01 (slow) to S.100

(fast).

5 Confirm with the ENTER button.

Bekijk gratis de handleiding van Eurolite LED Compact Multi FX Laser Bar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.