Eurolite LED Compact Multi FX Laser Bar handleiding

Verlichting

Eurolite

40 pagina's

PDF beschikbaar

Handleiding

00137589.DOCX, Version 1.0

29/40

CONNECTIONS

Power Supply

The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.

1 Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.

2 To switch off the unit, disconnect the power plug.

3 Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains

outlet which is switchable.

4 The jack POWER OUT allows for power supply of further devices. To interconnect several devices,

connect the jack POWER OUT to the input POWER IN of the next unit until all units are connected.

Matching power cables are available as accessories. In this manner, up to 8 devices can be linked at

230/240 input voltage and up to 4 devices at 110/115 input voltage.

DMX512 control

A DMX512 data link is required in order to control the device via DMX. The device provides 3-pin XLR

connectors for DMX connection.

1 Connect the output of your DMX controller to the DMX input DMX IN of the light set with a DMX cable.

2 Connect the DMX output DMX OUT of the light set to the DMX input of the next unit in the chain. Always

connect one output to the input of the next unit until all units are connected.

3 At the last unit, the DMX cable has to be terminated. Plug the terminator with a 120 Ω resistor between

Signal (–) and Signal (+) in the DMX output of the last unit.

4 If the cable length exceeds 300 m or the number of DMX devices is greater than 32, it is recommended

to insert a DMX level amplifier to ensure proper data transmission.

Device 1

Starting Address 1

Device 2

Starting Address 11

Device 3

Starting Address 21

DMX Controller

Program

Chase32 Step100

Bekijk gratis de handleiding van Eurolite LED Compact Multi FX Laser Bar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.