Euro Appliances ECT600ACG handleiding
Handleiding
Je bekijkt pagina 13 van 21

13
corresponding cooking zone indicator of the hob top which has heated before will
display high temperature warning symbol “ ”.
If more than one zone is operating at the same time, total power will equal to the
sum of the powers of all the working cooking zones, each cooking zone will work
according to their power modulation ratio, and will not affect each other.
Note: 1. During the same period,only one hob top button is valid,that is only one
decimal point “ ” can be displayed.
2. Press minus button “ ”to set the power level to “0”,then the heating hob top
will close automatically.
。
4.Power level adjustment
Under the standby mode, press cooking zone select button to choose the
corresponding cooking zone, corresponding cooking zone digital tube decimal
point “ ” and heating level will display. You can press the plus “ ”and minus “ ”
buttons to adjust suitable power level.
By holding down either of these buttons, the value on the zone indicator will adjust
up or down. Each pressing “ ” button, power level will add one, until level 9, and
displayed on its corresponding digital tube. Each pressing “ ” button, power level
will reduce one, until level 0(Each pressing of “+” or “-” button, a short audible
signal will be heard).Keep pressing “ ”, “ ” buttons will make continuously
increasing or decreasing effect.
Upon completion of power level adjustment, the decimal point “ ”of digital tube will
stop flashing and normally display the power level within 10 seconds of no
operation.
When switching any of the cooking zone power level to 0, it will stop the power
output of that cooking zone.
If a cooking zone has been heated, power level of all the cooking zone are “0”, the
appliance will automatically enter into shutdown status after 1 minute no operation.
5.Auto-heating function
Your hob can auto-heating following the below steps:
5.1 Turn on automatic heating :Press plus or mimus button to set the power to level
9,then touch plus button “ ” to let the power level alternately display “ ” and “ ”.At
this time, press minus button“ ” to adjust the auto-heating level you need, such as
level 6. In this automatic heating process, the corresponding power level indicating
digital tube is alternately display “ ” and “ ”. Alternate display time is 2.5 minutes.
5.2 Press plus button to set the power to level 9, then touch plus button “ ” to let the
power level alternately display “ ” and “ ”.At this point, the default timing has
started.For example, after “ ” and “ ”alternately display for 10 seconds ,press the“ ”
to adjust the power level to level 6. The icons “ ” and “ ” will display for 2 minutes and
20 seconds.After 2 minutes and 20 seconds, the hob will turn to normal heating mode ,
corresponding power level indicating digital tube will display “ ”.
When setting the automatic heating function, the corresponding cooking zone will be
heated in level 9 for a period of time (heating time depends on the subsequent
Bekijk gratis de handleiding van Euro Appliances ECT600ACG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Euro Appliances |
| Model | ECT600ACG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4213 MB |






