Euro Appliances ECT600ACG handleiding
Handleiding
Je bekijkt pagina 12 van 21
12
Using the ceramic hob
Before first use
IMPORTANT: You should clean the ceramic hob surface (see “Maintenance
and cleaning” section).
You should switch on one cooking zone at a time, for 5 minutes at the maximum
setting. This will help to eliminate any new smell that exists and evaporate any
humidity that has formed on the heating elements during transit.
Do not burn off more than one zone at once.
You must place a saucepan filled half full with cold water on each zone as you burn it
off.
Operation instruction
1. Power on
After switch on the appliance,the hob will beep for once to remind power on,all of the
indicator digital tubes on the display screen will lit on for 2s, then the appliance
goes into shutdown mode.Note: If your hob with multi-ring, the corresponding
indicator digital tube decimal point “ ” will lit on.If your hob with single ring only, the
digital tube decimal point “ ” will not lit on.
Shutdown status: All the display will close except the high temperature warning
symbol “ ”; At this time, only the power button “ ” can operated by pressing and
holding, and other button operations are invalid.
2. Standby mode
Under shutdown status, press and hold “ ” button for 3s, the hob will beep for once
and then enter standby mode.
All the indicator digital tubes of the cooking zone will display “ ”(The symbol “ ” will
show in the cooking zone indicator if there is residual heat), timer place will show
“ ” as well, it will not heat at this time.
Under standby mode, if no any cooking zone heating operation, the appliance will go
into shutdown status automatically after 10s and beep once.
3. Heating control
Under standby mode, you can choose the cooking zone by pressing the cooking
zone select button, then press plus or minus button or to adjust the power level of
the corresponding cooking zone. Press and hold plus “ ” or minus “ ” buttons
can continuously to increase or decrease the power level.
When the hob top is in heating status, press and hold “ ” power button for 3s to
switch off, and stop all the cooking zones to heat. The corresponding cooking zone
indicator of the hob top which has heated before will display high temperature
warning symbol “ ”.
Under standby mode, if some hob tops still exist residual heat, display will show “ ”.
If needing to switch off one of the cooking zones, you can select that zone first, then
press the minus button “ ” until “0” power level to switch off that zone, and will not
affect the heating of the other cooking zones. When power level reaches “0”, the
Bekijk gratis de handleiding van Euro Appliances ECT600ACG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Euro Appliances |
| Model | ECT600ACG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4213 MB |
