Eura ADP-26A3 handleiding
Handleiding
Je bekijkt pagina 12 van 32
12
EN
3. CONDUCTING A CONVERSATION
When the person at the entrance presses the button on the external panel, the gong signal is activated in the internal
module (intercom). Aer picking up the handset of the internal module, a conversation can be conducted with the person
at the entrance. The person inside the room has the ability to remotely open the gate by pressing the electromagnetic
lock release button on the intercom and to open the gate ((second gate, door, etc.) by pressing the gate
opening button.
ATTENTIION!
During intercom standby mode, if the handset is lied, it will be possible to conduct a conversation, release the lock, and open
the gate.
4. PROGRAMMING
4.1. ADDING USER REMOTE CONTROL KEYS
ATTENTIION!
The remote control keys included in the set are pre-programmed from the factory.
The device allows the addition of user key fobs, which, when brought close to the reader, will release the lock. The set
includes two administrator key fobs: the add key fob (Add Card) and the delete key fob (Delete Card), as well as 5 user key
fobs. To add a user key fob, in the standard operating mode of the device, swipe the add key fob (Add Card) in front of the
reader until an acoustic signal appears. Then, swipe the new user key fob in front of the reader, and nally, swipe the add
key fob (Add Card) again — an acoustic signal will conrm the successful addition of the key fob.
4.2. REMOVING USER KEY FOBS
To remove a user key fob, in the standard operating mode of the device, swipe the delete key fob (Delete Card) in front
of the reader until an acoustic signal appears. Then, swipe the user key fob you want to remove from memory in front of
the reader, and nally, swipe the delete key fob (Delete Card) again — the appearance of an acoustic signal will conrm
the successful removal of the key fob.
4.3. INITIALIZING NEW ADMINISTRATOR KEY FOBS
Press and hold the S1 button for 3 seconds, then release the button aer hearing 3 short tones and 1 long tone. Next,
swipe 2 key fobs, the rst one will be set as the add key fob (Add Card) and the second one as the delete key fob (Delete
Card). Aer programming, the external unit will automatically return to normal operation mode. The process of adding
new administrator key fobs is complete.
5. OPENING THE GATE OR ADDITIONAL ENTRY
In addition to remotely opening the entrance gate or door, the intercom also oers the ability to control a second entry,
such as a driveway gate opener, garage door opener, lock at a second gate, or door, etc. To control the second entry,
use the 5 and 6 terminals at the back of the intercom housing. Terminals 5 and 6 serve as a N.O. (normally open) relay
output, so for proper operation, the gate opener should also allow triggering by briey shorting the input terminals
(N.O.). In this case, simply connect terminals 5 and 6 at the intercom output, for example, in parallel with a push button
inside the premises used to manually operate the gate opener (see diagram B1). It is also possible to connect a standard
electromagnetic lock to terminals 5 and 6, for example, to open a second gate to the premises. In this case, the lock
must be powered by a separate power supply with parameters (voltage and current rating) appropriate for the lock’s
specications (see diagram B2).
6. SOUND SIGNALS
Valid card 1 short signal
Invalid card 2 short signals
Entering/exiting the card adding mode 1 long signal
Entering/exiting the card deletion mode 1 long signal
Successful user card addition 1 short signal
Unsuccessful user card addition 1 short signal
Duplicated card number 2 short signals
ntering administrator card adding mode 3 short signals and 1 long
CCLEANING AND MAINTENANCE OF INDIVIDUAL COMPONENTS OF THE SET
In case of dirt on individual parts of the set, clean them only with a so, slightly damp cloth with a small amount of
cleaning agents designed for cleaning plastic parts.
ATTENTIION!
The use of cleaning agents based on solvents, gasoline, etc., and products containing abrasive substances is prohibited!
Bekijk gratis de handleiding van Eura ADP-26A3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eura |
| Model | ADP-26A3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5794 MB |
