EtherWAN ED3501 handleiding
Handleiding
Je bekijkt pagina 17 van 26
17
ED3501 Industrial Ethernet Extender User Guide
Connecting to the 10/100 Mbps RJ-45 Port
The front panel of the Industrial Ethernet Extender provides one 10/100 Mbps RJ-45 port
(see “10/100 Mbps RJ-45 Port” on page 11). To prevent ESD damage, follow normal board
and component handling procedures.
To connect devices to the Industrial Ethernet Extender’s 10/100 Mbps RJ-45 port:
1. Insert one end of a Category 5 or better Ethernet cable into a Ethernet port.
2. Insert the other cable end into the Ethernet port of a computer, printer, network storage, or
other network device.
Connecting to Ethernet Extender Port
The front panel of the Industrial Ethernet Extender provides one RJ-11 connector or Terminal
Block (see “Ethernet Extender Port” on page 12). To prevent ESD damage, follow normal
board and component handling procedures.
To connect the Industrial Ethernet Extender’s Ethernet Extender port:
Insert the voice grade copper wire between one pair of Ethernet Extenders via Ethernet
Extender port (RJ-11 connector or Terminal Block). One device must be set to LOC mode
and the other to Auto mode when two devices are connected.
Checking the Installation
Before you apply power:
Inspect the equipment thoroughly.
Verify that all cables are installed correctly.
Check cable routing to make sure cables are not damaged or create a safety hazard.
Be sure all equipment is mounted properly and securely.
Applying AC Power
Before you connect the power adapter, select an AC outlet that is not controlled by a wall
switch, which can turn off power to the Industrial Ethernet Extender. After you select an
appropriate outlet, use the following procedure to apply AC power.
1. Connect the female end of the supplied AC power adapter cable to the power receptacle on
the back of the Industrial Ethernet Extender.
2. Connect the 3-pronged end of the AC power adapter cable to a grounded 3-pronged AC
outlet.
When you apply power:
All green Link/Activity LEDs blink momentarily.
Bekijk gratis de handleiding van EtherWAN ED3501, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EtherWAN |
| Model | ED3501 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2154 MB |
