ETA Manny 9634 90000 handleiding
Handleiding
Je bekijkt pagina 19 van 40
All other information, operating instructions of the app, instructions and hints for
successful pairing with home network can be found at:
www.etasince1943.com/air
CONTROL
When the appliance is plugged into the power supply, an acoustic signal sounds and the
humidier is in a standby mode. Display shows the current relative humidity value. If the
appliance is plugged into the mains, the display will remain lit and cannot be switched o.
button A1 – the first press turns on the humidifier to medium mist intensity, at the same
time the backlight is activated. Press a second time to turn off the backlight.
Press a third time to turn off the appliance.
button A2 – every press changes the mist intensity: low(1)>medium(2) >high(3) >low...
button A4 – the first press will enter the timer setting mode in the range of 1-12h. The
number on the display representing the setting starts flashing, press the button
repeatedly to select the desired time – then wait a few moments for the selected
value to be automatically saved. After the set time has elapsef, the humidifier
will automatically turn off. The active function is represented by the displayed
alarm clock icon. You can cancel the countdown by long pressing the A4 button.
button A5 – by pressing the button A5 you set mode that maintains set relative humidity in
the range from 30 – 75 %. Each press changes the settings by 5 % - then wait a
moment set value will be saved automatically. If the relative humidity falls under
the set level, the appliance turns on and starts hymidifying. Once it reaches the
relative humidity set level, it switches off again. If the humidity level reaches 85
%, the appliance turns off. The active function is represented by the displayed
drop icon. To cancel the function, press button A5 for a long time.
Warning
– If there is not enough water in the humidifier container, or if you lift the container,
a red drop icon will appear on the A3 display. Refill the water and put the container
in place.
– Acoustic signal sounds each time you press the button.
INSTRUCTIONS FOR USE
1. Place the humidier on a suitable at surface.
2. Remove the tank B from the humidier A in accordance with Pic. 1.
3. Fill the tank B with water (at least 300 ml, ideally 1 – 5 l). You can also add aromatic
fragrance (a few drops) to the container. Do not pour water directly into the base area.
4. Place the tank B on the humidier A in a reverse way.
5. Connect the plug to the power supply.
6. Press the A1 button to turn on the humidier. Then, with a short press of button A2, set
the amount of water vapor produced, or set the running time with timer A4, or choose
the level of relative humidity you want to maintain with button A5.
7. You can turn the humidier o any time during operation by pressing the button A1.
19
EN
/ 39
Bekijk gratis de handleiding van ETA Manny 9634 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Manny 9634 90000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4001 MB |
