ETA Lucas 4343 90000 handleiding
Handleiding
Je bekijkt pagina 24 van 52
EN - 24
EN
Lightning
Flashing
Warning of the need to maintain.
Warning of the need to maintain the blocked shaving units
Lock funkction A1 button
• Hold down the on / off button until for 3 seconds (counting down on the display)
and a locked lock symbol
is shown on the display, which goes out after 3 -4 seconds.
• Now, the function of the lock is activated and the shaver cannot be switched on.
• To cancel the lock function, press and hold again the A1 button (for about 3 seconds).
Use
First select the attachment you want to use for purposes. You have 3 different attachments with different
uses to choose from. All these attachments (A4, B1, B2) are put on the appliance in the same manner.
Follow instructions on pic. 4. When removing the attachment, proceed reversely. Press lightly on the fixed
attachment from the front part of the attachment. This will release it, you can now remove it. Cutting
attachment B1 can be used with comb attachment B3 with various length of cutting.
Beard shaving (fig. 3 - 6)
1) Remove the protective cover A6 from the shaving head A4.
2) Switch on the shaver using the A1 button.
3)
Apply the user to the face skin with gentle pressure and shave all the required areas on the face using
light movements against the direction of beard growth.
4) At all times, hold the shaver at right angles (90°) to your skin.
5) After you have finished switch the shaver off.
We recommend oiling the blades with the oil attached. You may use the appliance with attachment B1 for
trimming contours or with a attachment B1+B3 according to a desired hairstyle length. Wash, dry and brush
your hair with a brush before trimming. Turn the appliance on with the switch A1. Hold the appliance with
ease so that you can control it perfectly. Trim off only little bits of hair first to get used to the length of hair
which the attachment offers. For an even haircut never go through the hair fast. The clippers work best at
their own pace. Turn the clippers off with the switch A1 after finishing.
ATTENTION
• In case an the blades gets blocked, the appliance must be turned off immediately and the cause of the
block removed.
Contouring B1 without the hair clipping comb attachment (fig. 4, 9)
1) Remove the hair comb (if it is attached). Be careful when you are clipping without comb attachment as when
the clipper is turned on it will trim every hair it touches.
2) Tilt the clipper in such a way that only one edge of the trimming attachment touches the hair ends when you
shape the contours around the ears.
3) To contour the nape of the neck or hairline, turn the clipper and hold it with the trimming attachment pointing
downwards.
4) To contour the sideburns, turn the clipper and hold it with the trimming attachment pointing downwards.
Bekijk gratis de handleiding van ETA Lucas 4343 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Lucas 4343 90000 |
| Categorie | Scheerapparat |
| Taal | Nederlands |
| Grootte | 4458 MB |
