ETA Fortis 7224 90000 handleiding
Handleiding
Je bekijkt pagina 36 van 80

V. REMOVING CONTAINERS
REMOVING WATER (CLEANING SOLUTION) CONTAINER
When removing container B, proceed according to Fig. 4. Discard the remaining water or
cleaning solution from the container. Reinsert the clean container into the appliance.
REMOVING DIRT WATER CONTAINER
When removing container C, proceed according to Fig. 7. Discard the vacuumed impurities
into sewage. Reinsert the clean container into the appliance.
VI. CLEANING AND MAINTENANCE
Self-Cleaning (Fig. 8)
The cleaner can clean the roller brush and pipeline automatically on Self-Cleaning Base:
Please make sure there is enough clean water in the clean water tank B, empty dirty
water container before self-cleaning. Place cleaner on the charging station E, plug in the
power supply F well. Press the Self-Cleaning button A6, the indicator will be white and
flash slowly, and the cleaner will spray the clean water, clean the roller brush and pipeline
automatically, meanwhile, it will vacuum the dirty water into the dirty water tank C. Please
unplug the power supply and clean the dirty water tank once the self-cleaning mode
finished to avoid getting stinky.
Notes
– The Self-Cleaning can only be applied when charging on the charging station.
– For hygienic reasons, we recommend emptying and cleaning the containers (B, C) after
each use. Do not leave water in any of the containers.
Clean the appliance and adapter surface with a soft wet cloth. Do not use any rough and
aggressive detergents!
Floor nozzle with rotary brush
Remove any dirt (especially hair, animal hairs, etc.) stuck to the brush. To make cleaning
easier, the brush can be removed (Fig. 10). Clean the space with a suitable tool (e.g.
cleaning brush H or tweezers), Fig. 11. Warning: Do not water the floor nozzle in running
water directly, it will damage motor and PCB. After the maintenance, apply a reverse
procedure to install the brush in the nozzle and secure it. Wipe the UV light cover with
a damp cloth. The UV lamp has a long service life. However, if it stops working or gets
damaged, please contact an authorized service centre for replacement.
Containers
Clean the surface of container B with a damp cloth, rinse the inside with water. Rinse
container C with water and detergent.
CAUTION
The containers (B, D) is not resistant to cleaning in a dishwasher.
HEPA lter C3, lter C4, separator C2 (Fig. 7)
Rinse the lter under running water in the top-down direction. The lter can be removed
from the separator for more thorough cleaning or replacement. Then, take lter C3 out and
clean it thoroughly, or replace it.
36
EN
/ 75
Bekijk gratis de handleiding van ETA Fortis 7224 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | ETA |
Model | Fortis 7224 90000 |
Categorie | Stofzuiger |
Taal | Nederlands |
Grootte | 8098 MB |
Caratteristiche Prodotto
Kleur van het product | Blue, Green, White |
Gewicht | 5380 g |
Breedte | 315 mm |
Diepte | 325 mm |
Hoogte | 1200 mm |