ETA Fortis 7224 90000 handleiding
Handleiding
Je bekijkt pagina 35 van 80
Advice
–
When there is fluid in containers B and C, refrain from tilting the appliance (below
angle <65° from the floor) and turning the appliance upside down with nozzle D lifted
up. The fluid could leak into the internal parts and subsequently damage the appliance.
– When you are using the floor nozzle D and the rotary brush will get blocked Error code
FF:10, (e.g. due to sucking in large foreign objects, due to winding carpet piles, threads
or hair on them etc.) turn off the vacuum cleaner by switch A1. Then remove the
cause
of blocking or clean the rotation brush if necessary (see par. VI. MAINTENANCE).
APPLICATION (Fig. 4, 5, 6)
1. Select a suitable brush according to the purpose of use (D2 or D3).
2. Pour clean water into container B (hot or cold). You can also add foamless detergent
suitable for cleaning hard floors.
3. Turn the appliance on.
4. Using slow and smooth motions, move over the contaminated floor. Apply water
(cleaning solution) using button A3 according to the amount of water on the surface so
that the floor is not cleaned dry.
5. When the level of water in dust container C reaches the MAX, turn off the appliance.
Discard the contents of the container and reinsert the empty container. Continue
cleaning.
6. When finished, turn off the appliance and place on charging stand E.
Notes
– When the cleaning is almost tone, do not apply cleaning water onto the floor at least
1 minute prior to turning off the appliance. Only vacuum the water that is on the floor.
That will prevent water from dripping from the appliance when moving it.
– If there are any larger impurities on the floor (bits of soil, rocks etc.), remove them first.
Then, you can start using the appliance.
– Spiral brush D2 is designed to remove coarse or dry impurities.
– Microfiber brush D3 is designed for finer cleaning and it is also suitable for more
sensitive floor materials.
– To prevent damage, never put wax, ethereal oils or similar substances in the
container
B
. Do not use liquid that are not transparent or even milky floor maintenance products
or liquid floor cleaners that are not water-dilutable in the water tank.
–
As soon as the water (cleaning solution) in container B is used up, empty
dirt water
container C.
– Before lifting floor nozzle D above the surface to be cleaned, ALWAYS turn off the
appliance first.
– If water starts dripping from air flow outlet A7, turn off the appliance and empty
container C. You can continue working after that.
–
The dust container is equipped with a safety system that
appliance
off in case the level in
the container reaches the limit. That prevents water penetration to the motor part.
– It is recommended to press button A3 when moving forward; do not add water when
moving backwards. The vacuum cleaner vacuums water off the floor when moved
backwards. Please, avoid continuously holding down button A3 which would lead to
continuous application of water. Such water amount is unnecessary and the water
container would get emptied fast.
EN
35 / 75
Bekijk gratis de handleiding van ETA Fortis 7224 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Fortis 7224 90000 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 8098 MB |
Caratteristiche Prodotto
| Kleur van het product | Blue, Green, White |
| Gewicht | 5380 g |
| Breedte | 315 mm |
| Diepte | 325 mm |
| Hoogte | 1200 mm |
