Handleiding
Je bekijkt pagina 16 van 36
EN
16 / 34
II. FEATURES OF THE DEVICE (pic. 1)
A – driving unit
A1 – switch A2 – supply cord
B – lid
B1 – seal
C – stainless steel vessel (0.8 / 1.5 l)
C1 – central shaft
D – antiskid pad E – sickle-shaped knife
III. PREPARATION AND USE
Remove all the packing material and take out the appliance with its accessories. Remove
all possible adhesive films, stickers or paper from the appliance. Before the first using the
appliance wash all the parts that will come into contact with foodstuffs in warm water with
detergent, rinse thoroughly with clean water and wipe dry. Whenever working with the
appliance do not forget to put the antiskid pad D under the vessel.
Appliance assembling
Please assemble the appliance according to Fig. 1. Apply reverse procedure to disassemble
the appliance.
Warning:
Always use only one bowl with the appliance. The two bowl of the bowl are not
right (pic. 2).
Controls
Start the drive by pushing the switch A1 (the motor runs only for the time when the switch
is pushed). While processing, we recommend using the pulses of operation. When
working, hold with one hand the driving unit and press the switch with the other hand.
Recommendation
– Do not use the knife for processing washy pastes!
– Do not process very hard materials (e.g. cinnamon, spices, nutmeg, turmeric, bean
coffee or only ice cubes etc.)! The knife would be blunt soon.
– The knife is designed for cutting (grinding), mixing various kinds of fruit, vegetables,
meat and to prepare purées.
– Cut the big pieces of foodstuffs into cubes of dimension at about 3 x 3 x 3 cm.
– When processing hard cheese, work only for a short time. During long work the cheese
could become warm and get lumped.
Food processing table
Here are some examples of processing, which can serve as an inspiration. Their goal is
not to give instructions but to show various possibilities to process the foodstuffs. Times
of processing are given in seconds.
Bekijk gratis de handleiding van ETA Flexo 4079 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Flexo 4079 90000 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 3550 MB |
