Handleiding
Je bekijkt pagina 15 van 36
EN
15 / 34
– This appliance is not intended for outdoor use.
– The appliance must not be used in damp or wet environment and in any environment
with the danger of fire or explosion (spaces where chemicals, fuels, oils, gases,
paints and other flammable or volatile materials are stored).
– Do not insert accessories into any body cavities.
– Never submerge the drive unit under water and do not wash under running water!
– The appliance is equipped with thermal safety fuse which disconnects current supply
incase of engine overloading. If it occurs, unplug the appliance and let the appliance
getcooled.
– If the appliance was stored in lower temperatures, acclimatize it rst.
– It is not allowed to modify the surface of the appliance in any way (e.g. using
a selfadhesive wallpaper, foils, etc.)!
– Before preparation, remove possible packages from food (e.g. paper, a PE bag, etc.).
– Do not use the appliance without the anti–slip base!
– The chopper is intended only to chop solid foodstuff!
– Do not turn on the appliance without any ingredients inside!
– Do not put more of ingredients than marked on the container (MAX marks).
– Do not exceed the maximum continuous operating time of the appliance, it´s 15 sec.
– WARNING: When the chopper is in the state of idle operation, e.g. The blade fails
to touch the foods, unplug the unit until the foods have been relaxed.
– After putting the cover and driving unit to the vessel the safety device shall release
and the appliance can be switched on.
– Before you remove the lid, let the rotating parts stop completely.
– Do not remove the lid if the propulsion unit is in operation!
– Do not process foods with a temperature over approx. 80 °C (176 °F).
– If the processed ingredients start to stick on the accessory (e.g. the knife, blender glass
or the lid), turn the appliance off and clean carefully with a spatula.
–
T
he containers is not intended for storage of foods. After the foods are processed, put
them in another container fit for storage.
–
The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges. Never put it on hot surfaces or do not let it hang
over the edge of a table or work tables. Hitting, stumbling or pulling the power cord e.g. by
children can result in tilting over or drawing the appliance down and serious injury!
– If you need to use an extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
– Check the condition of the power cord of the appliance regularly.
– In order to ensure safety and proper function of the appliance, use only original spare
parts and accessories approved by the manufacturer.
– Use this appliance only for the purpose for which it was designed as specified in this
user‘s manual. Never use the appliance for any other purpose.
– All texts in foreign languages and pictures shown on the packaging or the product itself,
are translated and explained at the end of this language mutation.
– WARNING: There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
– The producer does not undertake any responsibility for damage or injuries caused by
improper use of the appliance and the accessories (e.g. food deterioration, injuries,
cuts) and its guarantee does not cover the appliance in the case of failure to comply with
the safety warnings above.
Bekijk gratis de handleiding van ETA Flexo 4079 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Flexo 4079 90000 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 3550 MB |
