ETA Fenité 4353 90000 handleiding
Handleiding
Je bekijkt pagina 19 van 44
EN
19
/ 39
Note
– Each mode can only be used once a day, at the same time we recommend using all three modes
consecutively within one treatment cycle (individuals with more sensitive skin 2-3 times per week).
– Procedure time approx. 4 minutes.
CLEAN
Cleanses impurities in deep pores, shrinks pores, helps reduce pigmentation spots and acne,and contributes
to solving the problem of black spots and dull skin color.
Postup:
1. Turn on the appliance using the A1 button, the CLEAN mode is the default and is automatically activated.
Hold the appliance so that you touch (hand/ngers) the A5 sensor.
2. Gently massage the desired areas according to Fig. 2.
EMS
This mode is intended for easier incorporation of cosmetic products into the deeper layers of the skin.
Thanks to this regime, you can eectively apply products such as: moisturizing and rejuvenating creams, hyaluronic
acid, oligopeptides, etc. to the skin. It helps to calm the skin.
Procedure:
1. Apply the desired cosmetic product to the skin.
2. Turn on the appliance using the A1 button, set the EMS mode and hold the appliance so that you touch (hand/
ngers) the sensor A5.
3. According to Fig. 2, trace the individual parts of the face/neck. As soon as you feel resistance on the application
head, it means that the product has been absorbed into the skin and you can move on to other parts of the face.
HOT
This mode is intended for smoothing and softening the contours of the face. Thermal massage supports blood
circulation in the skin, increases its elasticity and freshness and keeps the skin in good condition for a long time
Procedure:
1. You can apply a facial mask to your face before use.
2. Turn on the appliance using the A1 button, set the HOT mode and hold the appliance so that you touch (hand/
ngers) the sensor A5.
3. Gently massage the desired areas according to Fig. 2.
Automatic shutdown function
During operation, after approx. 4 minutes, an audible signal will sound and the inscription showing the working function
(CLEAN, EMS, HOT) will start ashing, and after approx. 1 min of operation, the appliance will be switched o.
IV. MAINTENANCE
The appliance must be cleaned after every use! Use only soft cloth to wipe the surface of the appliance and the USB cable.
Do not use any abrasive or aggressive cleaning agents!
Guarantee of 24 months does not apply to decrease in the accumulator’s eective capacity caused by its use or
age. Eective capacity gradually decreases depending on the method of use of the accumulator.
Expert service must do the large maintenance or to intervene into inside parts of the appliance!
Non-observance of the instructions of the manufacturer cancels the right for guarantee repair!
Bekijk gratis de handleiding van ETA Fenité 4353 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Fenité 4353 90000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3892 MB |
