ETA Fenité 4353 90000 handleiding
Handleiding
Je bekijkt pagina 18 van 44
18
EN
/ 39
III. INSTRUCTIONS FOR USE
Before using the appliance, its battery must be charged rst. Charging is possible with the enclosed USB cable from
the mains, i.e. an AC adapter, or a backup power source.
CHARGING
– Before the rst use or if the appliance was not used for a long time, charge it completely.
– The standard charging time is approximately 2 hours and the fully charged accumulator allows for the operating
time of 45-170 min (based on set regime). The operating time decreases depending on the appliance loading and
due to the accumulator ageing and wear and tear.
1. Connect the machine via USB cable C to the electrical source (charger). The appliance cannot be used while
charging.
2. Do not exceed the designated charging time!
Note
The status and charging progress of the accumulator is shown on the display using the B4 indicator. Blinks
while charging and stays on when fully charged. A discharged battery is signaled by the blinking of the B4
indicator during operation.
Optimise the battery service life
– Do not leave USB cable connected to the appliance.
– During charging or regular operation, the appliance heats up, which is
a normal phenomenon, and not a reason for a complaint.
CONTROL
On/o button + setting operation modes (A1)
– By long pushing of button A1 (approx. for 2 sec.) you switch the appliance on/o. Upon switching on and o an
acoustic signal sounds.
– Press short A1 button to switch over the modes. – The operation mode you have set is shown on display B by
lighting up its name (CLEAN / EMS / HOT).
MODES OF OPERATION AND THEIR USE
The appliance contains 3 dierent modes with dierent manifestations. Each works with a dierent color, intensity
of vibration and electricity. pulses (including positive and negative ions), possibly by temperature. To activate the
function, it is necessary to hold the body of the product (thereby touching the A5 belt sensor and closing the loop).
We recommend that the process be carried out gradually as shown in Fig. 2.
Each mode can only be used once a day, at the same time we recommend using all three modes
consecutively within one treatment cycle.
Fotons therapy
Red light – eectively penetrates deep into the skin, revitalizes collagen, softens wrinkles, reduces pigmentation,
increases the eciency of absorption of cosmetic products, improves blood circulation in the subcutaneous tissue.
Blue light – it facilitates the synthesis of collagen, rejuvenates the skin, removes sagging skin, softens skin pores, has
an antibacterial and anti-inammatory eect, and contributes to soothing the skin (most suitable for oily, sensitive and
acne-prone skin).
Green light – supports standard cell function, accelerates lymph circulation, reduces swelling and soothes the skin.
Bekijk gratis de handleiding van ETA Fenité 4353 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Fenité 4353 90000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3892 MB |
