ETA Crema II 2052 90000 handleiding
Handleiding
Je bekijkt pagina 20 van 44
20 / 39
Stand with rotary bowl (D, E) – for ETA2052
Use: for whisking and mixing without having to hold the propulsion unit in hand.
Inserting:
place the stand D on a suitable working surface. Fasten the desired accessory B/
B1 into the propulsion unit A or C/C1. Put the mixer A on the bracket D1 so that
the toothing on the accessory ts in the toothing in the bracket and then push the
mixer all the way till it ts closely into the depression in the bracket (you will hear
an audible click). Fold out bracket D1. Place the bowl E with the ingredients on
the stand. Fold the bracket back only after its arrest has been clicked in (g. 3).
Removing the propulsion unit (A):
by pressing button D3, the arrest will be released and
it is then possible to remove the propulsion unit A from
the fold-out bracket D1.
V. MAINTENANCE
Before any handling with the appliance or its maintenance, switch off the appliance
and unplug the power supply cord from the electric socket. Do not use rough
and aggressive detergents! To clean the propulsion unit A and stand D use soft damp
cloth with soap.Make sure that water does not get inside the appliance. Wash the other
accessories right after use in hot water with a little detergent added, rinse them with clean
water and wipe them till dry (you can also use a dishwasher). Some ingredients can colour
the accessories in some way. But this does not affect the function of the appliance and it is
not a reason for a claim. This colouring usually disappears in some time. Never dry plastic
moldings over a heat source (e.g. heater, stove, radiator).
If the power cord becomes dirty,
wipe it with a damp cloth.
Recommendation
– When kneading, use the substances at the room temperature.
– First mix yeast in lukewarm milk. As soon as the dough gets into the shape of a ball,
stop kneading as you are used to, or leave the dough rise according to the recipe.
– When preparing tough dough, we recommend putting loose ingredients in the bowl first
for better mixing and then adding liquid ingredients.
Warning
– Switch on the appliance only when the accessories are immersed into the processed
ingredients.
– The hooks and whisks can be released from the propulsion unit only when the speed
selector A1 is in position 0.
– For whipping, only one whipping beater can be used in a suitable container.
Choose the size of the container according to the amount of the prepared mass.
– When preparing a larger amount of dough (max. 0.5 kg kneading very heavy types of
dough and 1.8 kg mixing light types of dough 1 batch) process it in several batches.
Under no circumstances should you prepare more than two batches after each other.
– Various types of flour may differ significantly in the amount of liquids needed and the
stickiness of the dough may have a major affect on the loading of the hand mixer. If you
hear that the hand mixer is being excessively loaded, turn it off, remove half the dough
and process each half separately.
EN
Bekijk gratis de handleiding van ETA Crema II 2052 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Crema II 2052 90000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4527 MB |
