Estella 348PEM4 handleiding
Handleiding
Je bekijkt pagina 12 van 16
www.EstellaEquipment.com12
USER MANUAL
1
2
3
5
4
6
MAINTENANCE
SAFETY INSTRUCTIONS
WARNING!
Maintenance and cleaning must always be carried out with the machine at a standstill and disconnected from
the mains power supply. Always keep the maintenance zone clean and dry.
DO NOT allow unauthorized persons to perform maintenance on the machine. Any replacements of parts and
accessory tools must be performed using original spare parts at authorized service centers, or directly by the
manufacturer.
LUBRICATION
The machine does not require any lubrication.
CLEANING THE MACHINE
WARNING!
Disconnect the machine from the mains power supply before cleaning it. DO NOT clean the machine using a
water jet. Only use non-toxic detergents specifically formulated for cleaning components used with foodstus.
REMOVING THE ACCESSORY TOOLS
At the end of each processing cycle, remove the accessory tools to clean the machine eectively.
Removing the mixer blade:
1. Put the blade (1) in the position shown in FIG. 8.
2. Raise the lever (2) and remove the bar (3).
3. Remove the blade (1) by sliding it upwards.
WARNING!
If the blade is not lying in the position shown in FIG. 8, it cannot be removed.
Removing the worm:
1. Unscrew the ring nut (4).
2. Remove the die (5).
3. Remove the worm (6).
WARNING!
Make sure that you clean the drive pins thoroughly after use in order to ensure correct coupling of the blade
and screw (FIG. 9).
FIG. 8 FIG. 9
2
3
5
4
1
6
Bekijk gratis de handleiding van Estella 348PEM4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Estella |
| Model | 348PEM4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2688 MB |
