Essentiel B ETV41 handleiding
Handleiding
Je bekijkt pagina 24 van 55
troubleshooting guide
Some minor issues can be resolved by the user. If the information below doesn't resolve
your specific problem, do not attempt to repair the appliance by yourself, but contact
your retailer's after-sales service.
The hob doesn’t switch on:
• The hob is improperly connected to the mains.
• Check the fuse in your home’s electric board and replace it if necessary.
• Check if there is a power cut.
The control buttons do not respond:
• The child lock is activated and the controls are locked. Press and hold for a
few seconds.
The touch-sensitive buttons are difficult to use:
• The touch-sensitive buttons are covered with water or grease. Make sure the surface
of the touch-sensitive buttons is clean and dry.
The glass of the hob is scratched:
• You are using cooking vessels with rough edges. Use cooking utensils with a flat,
smooth base. Check out the "Choice of cooking utensils" section.
• You are using an abrasive sponge or cleaning product. See the "Maintenance and
cleaning" section.
A cooking zone stops automatically and the residual heat indicator comes on:
• When an excessive temperature is detected, the hob will automatically stop.
• This is a safety feature in the event of overheating. You can turn the hob back on and
continue cooking.
The cooking plate is cracked:
• DANGER! Stop using the hob. Unplug it immediately and contact your dealer’s after-
sale service centre.
Error codes
If a technical problem is detected, the error codes listed in the table below may
be displayed:
Error
codes
Problems Solutions
E0
Faulty temperature sensor.
Contact your retailer’s after-sales
department.
E1
E2
E7
E3
E4
C1
Overheating
Allow the hob to cool down. If the problem
recurs, check that the installation is
properly ventilated.
EL
Supply voltage too low
Get the electrical installation checked by
an approved professional.
EH
Supply voltage too high
EU
Communication failure
Contact your retailer’s after-sales
department.
If any of the error codes persist, contact the after-sales service of your retailer.
Do not disassemble or carry out repairs yourself. Repairs carried out by
unqualified people are not covered by the warranty.
46
47
EN
Bekijk gratis de handleiding van Essentiel B ETV41, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Essentiel B |
| Model | ETV41 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5649 MB |
