Essentiel B ETV41 handleiding
Handleiding
Je bekijkt pagina 16 van 55
Follow the dimensions indicated in the diagram below.
There are vents on the outside of the hob.
Make sure that these openings are not blocked by the worktop when fitting the hob.
Please note that the glue between the plastic or wood material and the unit must
withstand a minimum temperature of 150°C so that the coating does not peel off.
The walls to the rear and sides, and the surrounding surfaces, must therefore be able to
withstand a temperature of 90°C.
Before fitting the hob, make sure that:
• The worktop is at right angles and level, and there are no structural elements interfering
with the spacing requirements.
• The worktop is made of a heat-resistant and insulated material.
• If the hob is fitted above an oven, the oven must have a built-in cooling fan.
• The installation will comply with all clearance requirements as well as the applicable
standards and regulations.
• If the appliance is not fitted with an accessible plug, the fixed installation must include
a system for disconnecting it in accordance with applicable regulations.
• The appliance must be connected to the mains power by an all-pole switch (e.g.
circuit breakers, fuses, residual current devices and contact switches) with a gap of
at least 3 mm between the contacts.
• CAUTION: Only use hob guards designed by the manufacturer of the cooking appliance
or recommended by the appliance manufacturer in the operating instructions, or hob
guards built into the appliance. The use of unsuitable guards could lead to accidents.
• This appliance is not intended to be operated using an external timer or a remote
control system.
• Consult local planning authorities and council regulations if you are unsure about the
installation.
Min. 50mm
Max. 5mm Max. 5mm
Min 25 mm
• Use heat-resistant, easy-to-clean finishes (e.g. ceramic tiles) for the wall surfaces
surrounding the hob.
After fitting the hob, make sure that:
• The power cable is not accessible through the cupboard doors or drawers.
• There is enough cool air flowing from outside the units to the base of the hob.
• If the hob is fitted above a drawer or cupboard, a thermal protection barrier must be
fitted under the bottom of the hob.
• The circuit breaker must remain easily accessible to the customer.
Fitting the mounting hooks
• The appliance must be placed on a stable and smooth surface (use the packaging).
Do not force to controls that protrude from the hob.
• Secure the hob to the worktop by screwing the 4 hooks under the hob (see photo)
after installation.
• Adjust the position of the hooks according to the thickness of the worktop.
A: Screw
B: Hook
C: Screw hole
D: Base
30
31
EN
Bekijk gratis de handleiding van Essentiel B ETV41, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Essentiel B |
| Model | ETV41 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5649 MB |
