Essentiel B ETI31c handleiding

49 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 25 van 49
Problems Possible causes Solutions
The pans do not
heat up and "
u "
appears on the
screen.
The induction hob
cannot detect the
pan because it is
not suitable for
induction cooking.
Use cookware suitable for induction
cooking. Consult the "Quality of the
pans and containers" section.
The induction hob
cannot detect the
pan because it is
too small for the
cooking zone or not
centred correctly on
the zone.
Centre the pan and make sure its base
matches the size of the cooking zone.
The induction hob
or a cooking zone
has switched off
unexpectedly, it
makes a beep sound
and an error code
is displayed (usually
alternating with
one or two digits in
the cooking timer
display).
Technical fault.
Note down the error code (letters and
numbers), unplug the induction hob
from the wall outlet and contact a
qualifi ed technician.
Error codes
If a technical problem is detected, the error codes listed in the table below may
be displayed:
Error
codes
Problems Solutions
E1
Faulty temperature sensor.
Contact your retailer’s after-sales
department.
E2
Eb
E3
E4
E5
Overheating
Allow the hob to cool down. If the problem
recurs, check that the installation is
properly ventilated.
E6
E7
Supply voltage too low
Get the electrical installation checked by
an approved professional.
E8
Supply voltage too high
U1
Communication failure
Contact your retailer’s after-sales
department.
If any of the error codes persist, contact the after-sales service of your retailer.
Do not disassemble or carry out repairs yourself. Repairs carried out by
unqualifi ed people are not covered by the warranty.
48
49
EN
0.5 W
0.5 W
NA
NA

Bekijk gratis de handleiding van Essentiel B ETI31c, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkEssentiel B
ModelETI31c
CategorieFornuis
TaalNederlands
Grootte5896 MB