Essentiel B ESLHP8-2b handleiding
Handleiding
Je bekijkt pagina 30 van 32
Problems Possible causes Solutions
The laundry
is wet at the
end of the
drying process
(continued).
The laundry was not spun well. Spin your laundry at a higher
speed than the speed at which
your washing machine was set
to spin.
The appliance or
programme does
not start.
The appliance may not be
plugged in.
The dryer door may be ajar. Make sure that the loading
door is properly closed.
You have not selected a
programme, or you have not
pressed the “Start/pause”
button to start the programme.
The child lock may be
activated.
Disable the child lock.
You may have selected a
delayed start.
The programme
stopped for no
reason.
The door may be ajar. Make sure that the door is
properly closed.
There may have been a power
outage.
Press the “Start/pause” button
to restart the programme.
The water collection tank is
full.
Empty the water collection
tank when the symbol
appears on the display.
The laundry has
shrunk or been
damaged.
Always select a programme
that is suitable for the type of
laundry to be dried.
Only dry clothes suitable for
tumble drying after checking
the labels on your clothes.
The drum light
does not come
on.
You did not switch on the
tumble dryer by turning the
programme selection knob.
The bulb is defective. Replace it with a bulb with
the same specifications as
the original bulb (see the
“Replacing the bulb” section).
The lint filter
cleaning symbol
is lit.
The filter is clogged with lint. Clean the filter.
Problems Possible causes Solutions
The “water
collection tank
full” symbol
is on/
flashing.
The water collection tank is
full.
Empty the water collection
tank.
There is a kink in the drain
hose.
If the appliance is connected
directly to a drain hose, check
the drain hose.
The condenser
filter cleaning
symbol
flashes.
The condenser filter is clogged. Clean the condenser foam
filter.
The symbol appears at
most every 5 cycles.
Audible tones
sound when
pressing the
buttons or
turning the
programme
selector knob.
The child lock (locking of the
control buttons) is activated.
Disable the child lock.
The filters may not be correctly
inserted into their housings.
Check that all filters are
correctly inserted.
If the above information does not help you to solve your specific problem, please
do not carry out repairs on your own. Contact your store’s after-sales service
department.
58
59
EN
Bekijk gratis de handleiding van Essentiel B ESLHP8-2b, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Essentiel B |
| Model | ESLHP8-2b |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 5057 MB |