Essentiel B ESLHP8-2b handleiding
Handleiding
Je bekijkt pagina 29 van 32
Replacing the bulb
The drum light switches on when the door is open. If the door is left open for more than
5 minutes and no adjustment is made, the light will go out.
Before replacing the bulb, unplug the power cord or remove the fuse from the
electrical circuit.
Bulb specifications: E14 base, 15 W, resistant to 300°C
1. Open the dryer door.
2. Remove the bulb protection cover (this is located in the inside door frame at the top).
To do this, unscrew the screw with a Phillips screwdriver.
3. Replace the bulb with a bulb that has the same specifications as the original bulb.
4. Put the cover back on. Make sure it is perfectly positioned on its support to ensure
watertightness, otherwise moisture could penetrate inside and cause a short circuit.
troubleshooting guide
Problems Possible causes Solutions
The drying
process is
excessively long.
Check the condition of the
filters (lint filter, condenser
foam filter).
Check that they are not
clogged.
The ventilation grille at the front
of the appliance is blocked.
Remove any objects (if any)
blocking the ventilation in front
of the grille.
The ventilation is not sufficient
because the room where the
appliance is located is very
small.
Open the room’s door
or window to prevent an
excessive rise in room
temperature.
Limescale has formed on the
moisture sensors.
Clean the moisture sensors.
You have overloaded the dryer. Do not overload your dryer.
Observe the maximum
capacities indicated in the
programme table.
The laundry was not spun well. Spin your laundry at a higher
speed than the speed at which
your washing machine was set
to spin.
The laundry is
wet at the end
of the drying
process.
After drying, warm clothes
appear to be wetter than their
actual moisture level.
It is possible that the
programme selected was not
suitable for the type of laundry.
Check the labels on the
clothing; Choose a programme
according to the type of
laundry and, if necessary,
supplement it with a timed
programme.
Check the condition of the
filters (lint filter, condenser
foam filter).
Check that they are not
clogged.
You have overloaded the dryer. Do not overload your dryer.
Observe the maximum
capacities indicated in the
programme table.
56
57
EN
Bekijk gratis de handleiding van Essentiel B ESLHP8-2b, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Essentiel B |
| Model | ESLHP8-2b |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 5057 MB |