Ermenrich Ping SM70 handleiding
Handleiding
Je bekijkt pagina 7 van 30
7
Manual calibration
1. Press the Stud detection button (7) to enter the stud detection mode.
2. Place the device flat against the target surface. When the display becomes dark, press the Stud detection button (7) to
force the device to calibrate.
3. Slowly move the detector across the surface in the direction you want to scan. When the signal is the strongest, the center
mark (14) lights up.
4. Remove the device from the surface and press the Power/Back button (4) to exit the calibration mode.
Usage
1. Press the Stud detection button (7) to enter the stud detection mode.
2. Complete the calibration and place the device flat against the surface to be tested.
3. Slowly move the detector across the surface in the direction you want to scan.
4. If a stud is detected, the screen will display the wooden/metal stud icon , the value of the distance to the target, and the
signal strength indication. The device emits a sound. The closer the device to the object, the stronger the signal.
AC detection mode
This mode is used only to detect live wires.
Calibration
1. Press the AC wire detection button (2) to enter the AC detection mode.
2. Place the device flat against the target surface.
3. Press the AC wire detection button (2) to start calibration. The calibration will be carried out automatically. When the white
part of the display becomes dark, the calibration is completed.
4. Remove the device from the surface and press the Power/Back button (4) to exit the calibration mode.
Usage
1. Complete the calibration and place the device flat against the surface to be tested.
2. Slowly move the detector across the surface in the direction you want to scan.
3. When the device detects a live wire, the screen will display the live wire icon , the value of the distance to the target, and
the signal strength indication. The device emits a sound. The closer the device to the object, the stronger the signal. You
can reduce the sensitivity of the device multiple times to narrow the search area even more and locate the live wire with
greater accuracy.
Specifications
Max. detection depth live wiring: 50mm
ferrous metals: 120mm / non-ferrous metals: 100mm
wooden/metal studs: 38mm
Sound alert +
Auto-off 5 min
Display 2.4" HD color screen, 240x320px
Operating temperature range 0… +50°C (operating), –10… +60°C (storage) /
32… +122°F (operating), 14… +140°F (storage)
Power source rechargeable polymer lithium battery, 390mA·h
5V 1A DC adapter (not included)
Type-C USB cable (included)
Dimension 63x25x139mm
Weight 138g
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
Do not touch the sensing area of the device during measurement in order to avoid mistakes, because the human body has
conducting properties. Do not exclusively rely on the detector to locate items behind scanned surfaces. Do not assume that
there is no live cabling inside a wall. Always use caution when nailing, cutting, or drilling in walls, floors, and ceilings that may
contain live cabling. Calibrate the device regularly following a routine schedule. Do not try to disassemble the device on your
own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the
device from sudden impact and excessive mechanical force. Store the device in a dry cool place. Only use accessories and
spare parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or
a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately.
Battery safety instructions
The device is equipped with a built-in rechargeable lithium-ion battery. This avoids frequent battery replacement. Always
switch the device off when not in use. If the battery charge is low, please recharge the device in time to ensure that the
measurements are accurate. Do not overheat the battery. Do not discharge the battery completely. Only use the original
charger.
Ermenrich Warranty
Ermenrich products, except for their accessories, carry a 5-year warranty against defects in materials and workmanship.
All Ermenrich accessories are warranted to be free of defects in materials and workmanship for six months from the purchase
date. The warranty entitles you to the free repair or replacement of the Ermenrich product in any country where a Levenhuk
office is located if all the warranty conditions are met.
For further details, please visit: ermenrich.com
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.
Bekijk gratis de handleiding van Ermenrich Ping SM70, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ermenrich |
| Model | Ping SM70 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3992 MB |
