Handleiding
Je bekijkt pagina 58 van 66
Equip® POS Thermal printer User Manual
53
Example of
use
1b 40
1D 6B 61 08 02 08 00 30 31 32 33 34 35 36 37
⑦
Status instruction
Transmission state
Command
name
Transmission state
Command
code
ASCII：GS r n
Decimal system：29 114 n
Hexadecimal system：1D 72 n
Function
Description
Transmit the state specified by n as follows.
n
Status
1.49
Paper Transfer Sensor Status
Parameter
range
n = 1, 49
Default value
None
Supported
Models
All models
Precaution
When using the serial interface:
If DTR/DSR control is set, the printer transmits only one byte after
confirming that the host computer is ready to receive data (DSR signal is
SPACE). If the host computer is not ready to receive data (DSR signal is
MARK), the printer waits until the host computer is ready.
If XON/XOFF control is set, the printer transmits only one byte and does
not acknowledge the DSR signal status.
This command is executed when data is generated in the print buffer.
Therefore there may be a time interval between the reception of this command
and the transmission status, depending on the status of the receive buffer.
When the automatic status reply ASB is activated with GS a, the status
transmitted with GS r and the ASB status must be distinguished.
The types of status transmitted by are shown below.
Bit
OFF
/ON
Hexadecimal
Decimal
ASB status
0,1
-
-
-
Meaningless
2,3
OFF
00
0
Paper Exhaustion Sensor: Sufficient
Printed Paper。
ON
(0C)
(12)
Paper out sensor is out of paper
4
OFF
00
0
Unused, fixed to off
5,6
-
-
-
Undefined
7
OFF
00
0
Unused, fixed to off
Bekijk gratis de handleiding van Equip 351006, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Equip |
| Model | 351006 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 8818 MB |
