Epson Expression Home XP-300 handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 20 van 32
20 Replacing Ink Cartridges
5. Before you open the new
cartridge package, shake it gently
four or five times. Then remove
the cartridge from the package.
Caution: Do not touch the
green chip or the small window
on the side of the cartridge.
This can damage the ink cartridge.
6. Remove the yellow tape from the side of the ink
cartridge.
Caution: Do not remove any other labels or seals, or
ink may leak.
7. Insert the new ink cartridge into the holder and push
it down until it clicks into place.
8. Lower the scanner unit.
9. Press
OK to begin charging the ink. This takes about
4 minutes. When you see a completion message on
the LCD screen, ink charging is finished.
Caution: Never turn off the your EPSON printer
while ink is charging or you’ll waste ink. If you see
an ink replacement message on the LCD screen,
press OK and press down all the cartridges
securely. Then press OK again.
Note: If you replaced a cartridge while copying a
document or photo, cancel printing and make sure your original is still placed
correctly on the document table. Then copy your original again.
If you remove a low or expended ink cartridge, you cannot reinstall and use the
cartridge.

Bekijk gratis de handleiding van Epson Expression Home XP-300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkEpson
ModelExpression Home XP-300
CategoriePrinter
TaalNederlands
Grootte3561 MB