Handleiding
Je bekijkt pagina 19 van 32
Replacing Ink Cartridges 19
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. You must install new cartridges
immediately after removing the old ones.
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Note: Leave the expended cartridge installed until you have obtained a replacement, or
the ink remaining in the print head nozzles may dry out.
1. Turn on your printer.
2. If an ink cartridge is expended, you see a message on the LCD
screen. Note which cartridges need to be replaced and press
OK.
If a cartridge is low, you can continue printing until a cartridge
needs replacement.
If you’re replacing a cartridge before you see a message on the
LCD screen, press
if necessary and select F Setup. Select
Maintenance, then select Ink Cartridge Replacement and
press
OK.
3. Lift up the scanner unit.
4. Squeeze the tab on the cartridge and lift it up. Dispose of it
carefully. Do not take the used cartridge apart or try to refill it.
Warning: If ink gets on your skin, wash it off with soap and
water. If ink gets in your eyes, flush them immediately with
water. If it gets in your mouth, spit it out and see a doctor
right away.
Bekijk gratis de handleiding van Epson Expression Home XP-300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Epson |
| Model | Expression Home XP-300 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 3561 MB |
