Epson EcoTank ET-2950 handleiding
Handleiding
Je bekijkt pagina 76 van 198
1. Select Maintenance on the printer's control panel.
2. Select Print Quality Adjustment.
3. Follow the on-screen instructions to print the adjustment pattern and scan it.
!
Caution:
Close the document cover before scanning.
Adjustments are performed automatically.
Note:
O Even if a blank sheet is ejected, follow the on-screen instructions to scan. If you scan a blank sheet of paper, scanning
will fail. If this occurs, select Cancel and follow the on-screen instructions.
O Check the following if scanning fails.
O When placing the adjustment pattern on the Scanner glass
Check the paper placed on the scanner glass and select Start Scanning. If the paper is folded or out
of alignment with the corner mark, it cannot be scanned.
O When placing a blank sheet of paper on the Scanner glass
Press the
button, and follow the on-screen instructions.
O If the problem does not improve even aer performing Print Quality Adjustment, go to Maintenance to perform all
available print head adjustments (nozzle check, cleaning, Alignment adjustment). See Related Information for more
details.
Related Information
& “Checking and Cleaning the Print Head” on page 76
& “Aligning the Print Head” on page 80
Checking and Cleaning the Print Head
If the nozzles are clogged, the printouts become faint, there is visible banding, or unexpected colors appear. If the
nozzles are severely clogged, a blank sheet will be printed. When print quality has declined, rst use the nozzle
check feature to check if the nozzles are clogged. If the nozzles are clogged, clean the print head.
c
Important:
O Do not open the scanner unit or turn o the printer during head cleaning. If the head cleaning is incomplete, you
may not be able to print.
O Head cleaning consumes ink and should not be performed more than necessary.
O When ink is low, you may not be able to clean the print head.
O If print quality has not improved aer repeating nozzle check and Cleaning 3 times or Power Cleaning once, wait
for at least 12 hours without printing, and then run the nozzle check again. We recommend turning o the
printer. If print quality has still not improved, run Power Ink Flushing. If it has still not improved, contact Epson
support.
O To prevent the print head from drying out, do not unplug the printer while the power is on.
You can check and clean the print head by using the printer's control panel.
Maintaining the Printer
>
Improving Print, Copy, and Scan Quality
>
Checking and Cleaning the Print Head
76
Bekijk gratis de handleiding van Epson EcoTank ET-2950, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Epson |
| Model | EcoTank ET-2950 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23801 MB |
