EPEVER DR3210N handleiding
Handleiding
Je bekijkt pagina 5 van 34
2
www.solarv.de
Copyright © 2021 SolarV GmbH
LED and LCD display units selectable.
AES control signal for car refrigerator to avoid energy waste.
Standard Modbus protocol, and RS485 (5V/200mA) communication port for the
customer to expand the application area.
①Main battery (BATT1) is the energy storage battery for powering the household loads in the
off-grid system, which supports Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn batteries (the
controller can NOT recognize the system voltage automatically).
②Starter battery (BATT2) is the energy storage battery which usually built in the vehicle for
powering the system such as RV and Boat, and only supports lead-acid battery (the
controller will recognize the system voltage automatically). NOTE:
the BATT1 and BATT2 must be at the same voltage level.
1.2 Name definition
1.3 Structure
Bekijk gratis de handleiding van EPEVER DR3210N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EPEVER |
| Model | DR3210N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5618 MB |
