Ensemble Designs BrightEye 76 handleiding

Niet gecategoriseerd

Ensemble Designs

26 pagina's

PDF beschikbaar

Handleiding

BrightEye 76

BrightEye 76 - Page 13

Timing Menu

Use the Timing Menu to set the parameters of the TBC and Frame Sync

functions. The timing function operates in one of three modes:

1. When the Frame Sync control is turned On and a proper reference signal

is connected to the Ref In BNC, the video output of the unit is synchronous

and locked to the external reference. The output may be timed with respect

to the Ref In using the timing controls. In this case, the unit will accept

asynchronous video and time base errors will be corrected.

2. When the Frame Sync control is turned On and no reference signal is

connected, the unit acts as a time base corrector only. The output is not syn-

chronous to any reference, including the input. This mode allows a noisy

input signal to be time base corrected for a clean, stable output.

3. When the Frame Sync control is turned Off,any reference signal to the

Ref In BNC is ignored. The video input is synchronous to the video output

when a nearly perfect, clean video input signal is present (no time base cor-

rection required).

The following timing control is available when the Frame Sync function is On:

•Timing– adjust the vertical and horizontal timing of the signal with

respect to the reference input. Click the Default button to return to the

default value.

Use the following control to enable the Frame Sync function:

•Frame Sync– set the Frame Sync function to On to genlock to the

reference input to the module, or to Off for no Frame Sync.

Bekijk gratis de handleiding van Ensemble Designs BrightEye 76, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.