Ensemble Designs BrightEye 16 handleiding

Niet gecategoriseerd

Ensemble Designs

24 pagina's

PDF beschikbaar

Handleiding

BrightEye 16 D-to-A Converter TBC/FS and Disembedder

BrightEye-6

The Gain indicator illuminates red when the gain level has been adjusted

off from unity by the user. The 0 VU point corresponds in the digital domain

to the digital reference level (-18 or -20 dBFS) and in the analog domain to

the analog reference level (-10 or +4 dBu).

Pwr (Power)

Illuminates green when power is applied to the converter and the internal

voltage regulator is functioning correctly

ADJUSTING PARAMETERS FROM THE FRONT PANEL

Use the Mode, Right Arrow, and Left Arrow buttons to select and adjust

parameters from the front panel.

Pressing the Mode button activates the front panel for editing and tabs between

each section of editable parameters.

Pressing the Right Arrow or Left Arrow advances the selection within a given

section of parameters, or increases (Right Arrow) or decreases (Left Arrow) the

value of a selected parameter.

The LED of an edited parameter will blink for 15 seconds, after which time its value is

stored in memory. If power is interrupted before this 15 second timeout period has

elapsed, the edited state will not be not saved.

The controls and their indicators are described below.

NOTE:

Bekijk gratis de handleiding van Ensemble Designs BrightEye 16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.