Ensemble Designs BrightEye 10 handleiding

Niet gecategoriseerd

Ensemble Designs

21 pagina's

PDF beschikbaar

Handleiding

BrightEye 10 Optical/SDI to Analog/SDI Converter

Output Menu

• Output – select the type of output signal from the unit from the Output

pulldown as Composite, Beta, SMPTE, or RGB.

• Gain – adjusts the gain of the analog video signals in the Digital-to-Analog

converter and encoder circuitry of the converter. The front panel indicator

will light green when the gain is set to its nominal or unity setting.

This is the setting which will produce correct analog output levels from an

digital or optical input source which itself is at proper level. The indicator

will light red whenever the control is adjusted either higher or lower than

the nominal setting. The gain can be reset to nominal by selecting the

Default button.

• Chroma – adjust the amount of chroma on the output signal in percent as

required. This control is only available on BrightEye PC or Mac. There is no

front panel control or indication of this setting.

• Setup – check the box to add setup to the output signal (525 mode). Leave

the box unchecked for no setup. This control is only available on BrightEye

PC or Mac. There is no front panel control or indication of this setting.

Setup will be grayed out when a SMPTE, RGB, or 625 input signal is

present.

• Vert Blanking – select the blanking width with this pulldown from Wide

(PAL Lines 1-22, NTSC Lines 1-20) or Narrow (PAL Lines 1-6, NTSC Lines

1-9). This control is only available on BrightEye PC or Mac. There is no

front panel control or indication of this setting.

BrightEye-10

Bekijk gratis de handleiding van Ensemble Designs BrightEye 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.