Engenius ENS500 handleiding
Handleiding
Je bekijkt pagina 64 van 72
10 Network Configuration Example
This chapter describes the role of the ENH500 with 4+1 modes. The Access Point mode’s
default configuration is a central unit of the wireless network or as a root device of the wired
environment. Repeater mode and Mesh network mode need future configuration.
10.1 Access Point
Access Point
Step1 Login to the web-based configuration interface with default IP
192.168.1.1
Step2 Select your country or region’s regulation.
Step3
Use site survey to scan channels that have been used in nearby
area.
Step4 Select channel with less interferences.
Step5
Specify the SSID for your broadcast SSID and you can also
configure multiple SSID at the same time.
Step6 Verify VLAN identifier to separate services among clients
Step7 Setup the authentication settings.
Step8 Apply to process all the configurations.
For more advanced settings, please refer to the previous chapters.
Wireless Client
Step1 Select wireless mode you would like to associate with.
Step2
Use site survey to scan nearby Access Point and select the certain
AP you would like to connect with or enter SSID manually.
Step3 Configure VLAN ID in your wireless device if available.
Step4 Select correct authentication type and password.
Bekijk gratis de handleiding van Engenius ENS500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Engenius |
| Model | ENS500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11185 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 300 g |
| Breedte | 99 mm |
| Diepte | 185.42 mm |
| Hoogte | 28.95 mm |
