Enabot EBO Air 2 handleiding
Handleiding
Je bekijkt pagina 4 van 32
Safety Information
Please read the following safety instructions carefully before using this product and follow general safety
precautions to ensure optimal performance and safe operation.
1. Only authorized technicians should disassemble or repair the product. Do not attempt to disassemble or
service it yourself.
2. Before first use, remove any protective film from the device to ensure proper functionality.
3. Do not place the robot on high or unstable surfaces (such as tables, coffee tables, or TV cabinets) to prevent
falls and potential damage.
4. Do not use the product near open flames, fragile items, or areas where flammable items are present.
5. Do not throw or kick this product.
6. Avoid using the robot on wet or slippery floors, such as in bathrooms or toilets.
7. Only use the product in an environment with a temperature of -10℃ to 40℃.
8. Ensure the operating area is covered by a stable Wi-Fi signal for optimal performance.
9. Avoid bending wires excessively or placing heavy or sharp objects on the device.
10. Keep wires out of reach of pets to prevent chewing or biting, which could pose safety risks.
11. Any operation inconsistent with the user manual may damage the product.
12. Do not immerse the product in water or expose it to moisture. Keep it dry at all times.
13. Please use the original battery and avoid replacing it with non-compatible batteries to prevent risks of short
circuits, fire, or explosion. Do not disassemble, heat, or impact the battery. If the battery shows abnormalities
(e.g., swelling, smoking), immediately power off the device and move away. Dispose of used batteries in
accordance with environmental regulations. Avoid using or storing the battery in high-temperature or
high-altitude low-pressure environments to prevent performance degradation.
Packaging Contents
EBO Air 2 robot
Charging Station
Charging Adapter
Instruction Manual
Power/Reset Pin
2. Charging Station
Charging status indicator
Infrared emission window
Charging Springs
Anti-Slip Adhesive
Sticker
Secure Cable Slot
Product Overview
Note: You can purchase feather accessories on the
official website to insert into the expansion port, or
customize extensions based on the expansion port.
1. EBO Air 2 robot
Status/expression light
Microphone
Expansion Port
Speaker
SD card slot
Wheel-Locking Screw
Charging Band
Wheel Module
Reset Button
Camera
Infrared laser
Optical sensor area
Robot Operation Instructions
1. Turn the robot ON/OFF:
a. Use the tip of the Switch/Reset Pin to press and hold the Switch/Reset Button (located on the bottom of the
robot) for about 2 seconds to turn the robot ON. The robot will emit a power-on sound, indicating it has turned on
successfully.
b. Use the tip of the Switch/Reset Pin to press the Switch/Reset Button (located on the bottom of the robot) twice
in a row to turn the robot OFF. The status/expression light will go out when the robot is turned off successfully.
2. Reset the robot:
Use the tip of the Power/Reset Pin to press and hold the Reset Button (located on the bottom of the robot) for
more than 5 seconds. The robot will make a reset successful sound, indicating it has reset successfully.
NOTE: Resetting the robot will not clear data from the SD card. To format the SD card, please use the App.
3. Maintenance and Precautions:
a. Please clean any hair or debris from the wheel modules every 1-2 weeks. Use the wide end of the Switch/Reset
Pin to loosen or tighten the wheel-locking screws if needed.
b. Do not place the robot on high surfaces such as TV cabinets, coffee tables, or desks to prevent falls and
potential damage during operation or automatic recharging.
c. Keep the robot out of bathrooms or other wet environments. There is a risk of it falling into water (e.g., a
toilet), which can cause significant damage.
01 02
Bekijk gratis de handleiding van Enabot EBO Air 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Enabot |
| Model | EBO Air 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5718 MB |
