Empress Effects Zoia handleiding
Handleiding
Je bekijkt pagina 29 van 40
Start Patch: Select which patch you’d like ZOIA to boot into
when you power it on.
Start State: Select whether you’d like the ZOIA to start up
bypassed or engaged.
Input Pad: Here, you can adjust the ZOIA’s input headroom. The
default setting is -6dB. If you hear any clipping distortion when
feeding your ZOIA a hot signal, you can set the pad to -12dB. If
you have a quiet signal and you’d like to increase your signal-to-
noise ratio you can select 0dB. Note that the input pad setting
affects both inputs.
Auto Shift: Turning on Auto Shift will change the behaviour of
the top row of buttons on the grid, so that they will perform
their secondary function without having to press shift.
This can be very handy when building a patch. You can still
place, edit, and connect modules on that row by pressing
shift while pressing a grid button. It’s basically reversing
the behaviour, but only for the top row. We recommend against
placing modules like keyboard or pushbutton in the top row if
you make regular use of the Auto Shift feature.
Starred CC ch: Select which channel ZOIA will listen to for
starred parameter MIDI CC messages.
MIDI Consume: Select the desired MIDI pass-through
behaviour. “All” will completely disable any MIDI throughput,
“some” will block MIDI signals used by existing modules, and
“none” will allow all incoming MIDI to pass through.
Patches to SD: Manually export all the patches from ZOIA’s
internal memory onto the SD card. You can select an existing
folder on the SD card, or create a new one. If saving to
29
Bekijk gratis de handleiding van Empress Effects Zoia, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Empress Effects |
| Model | Zoia |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2275 MB |
