Empress Effects Echosystem handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132/ 32

Afdrukken

Je bekijkt pagina 13 van 32

Changing Banks

To bank up, press the right and middle stompswitches

simultaneously. To bank down, press the le and middle

stompswitches simultaneously. The LEDs will ash indicang

the target bank, then you can press any of the stompswitches

to load a preset within that bank.

Saving a Preset

To save a preset, set the knobs to the sound you would like to

save, then navigate to the target bank. While the lights are

blinking, press and hold the shi buon and select the target

preset locaon by pressing the corresponding stompswitch.

BANK PRESET SYSTEM - WITH EXTERNAL TAP

If you’d like three presets per bank, you can use an external tap

switch. By seng the pedal’s Advanced Conguraon to bank

presets and the control port seng to either normally-open tap

or normally-closed tap you will get 3 presets available per bank.

(Changing the delay me source is done by holding the shi

buon and pressing the external tap in this conguraon.)

What sengs are saved in my preset?

If you change the posion of a knob or switch aer a preset is

loaded, the preset LEDs will dim to indicate that the preset has

been modied, but not saved. If you move the knob or switch

back to the posion it was in when the preset was saved, the

preset’s LED indicators will brighten again. This lets you nd the

posions of all the knobs and switches as saved in the preset.

1234567891011121314151617181920212223242526272829303132/ 32

Bekijk gratis de handleiding van Empress Effects Echosystem, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd