EMOS P56201BUF handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370/ 370

Afdrukken

Je bekijkt pagina 12 van 370

GB | 10

Advanced Settings

Temperature Calibration

• The temperature sensor in the thermostat is calibrated from production, but additional calibration can

be done to optimise the thermostat further, for instance by comparing the measured room temperature

with a reference thermometer.

• Example: The thermostat shows room temperature of 22 °C; setting calibration to +1 °C will cause the

thermostat to display 23 °C instead.

• Calibration can be set in EMOS GoSmart in a range of -9 °C to 9 °C with 1 °C resolution.

Temperature Dierential

• The temperature dierential (hysteresis) is the dierence in temperature required for switching the

system on and o.

• Example: If you set the temperature in the heating system to 20 °C and dierential to 2 °C, the thermostat

activates heating as soon as room temperature drops to 18 °C and switches heating o when temperature

reaches 22 °C.

• The temperature dierential of the internal sensor can be set to between 0.5 °C and 2.5 °C.

• The temperature dierential of the oor sensor can be set to between 1 °C and 9 °C (EMOS GoSmart app).

Temperature Limits for Manual Thermostat Settings

• Maximum temperature setting limit – species the maximum temperature that can be set on the ther-

mostat (20 °C to 70 °C, 1 °C resolution).

• Minimum temperature setting limit – species the minimum temperature that can be set on the thermostat

(1 °C to 20 °C, 1 °C resolution).

Temperature Protection

• High-temperature protection – species the maximum temperature the thermostat heats the system up to.

• Example: When temperature protection for the sensor is set to 45 °C and the limit to 2 °C, the thermostat

relay switches o if temperature exceeds 45 °C and turns on again if temperature drops to 43 °C.

• Low-temperature protection – species the lowest possible room temperature. If the temperature drops

below the set value, the thermostat will start automatically heating up the room. Can be set to between

1 °C and 10 °C.

Status of the Device after Reconnecting to Power after a Power Outage

• The same as before turning o – the thermostat returns to the state it was in before the power outage.

• O – the thermostat stays o after reconnecting.

• On – the thermostat turns on after reconnecting.

Active Temperature Sensor

• The setting denes which sensor is detecting temperature – either the internal sensor, oor sensor or both.

Child Lock

• The child lock is activated/deactivated in the settings of the EMOS GoSmart app or by holding the

button for 3 seconds.

• If the lock is active, a lock icon will be displayed on the thermostat’s screen or the thermostat’s main

page in EMOS GoSmart.

Thermostat Screen Brightness in Standby Mode

• Species screen brightness after 10 seconds of inactivity.

• Can only be adjusted in the settings on the thermostat’s screen.

• 0 = screen o

• 1 = room temperature is slightly illuminated on the screen

• 2 = room temperature is strongly illuminated on the screen

Open Window Function

• If the thermostat detects a sudden drop in temperature (e.g. when the window or door is open), it stops

heating the room.

• The thermostat will resume heating the room after the set time period elapses or after you close the

window.

• The function can only be set/turned o in the settings on the thermostat’s screen.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370/ 370

Bekijk gratis de handleiding van EMOS P56201BUF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Thermostaat