Handleiding
Je bekijkt pagina 7 van 252
Safety - ENGLISH 7
WARNING!
• Make sure that the work surface is square and level, and no structural parts interfere with space
requirements.
• Do not install the hob above an oven if the oven does not have a built-in cooling fan.
• Make sure that the isolating switch is of an approved type and provide a 3 mm air gap contact
separation in all poles (or in all active phase conductors if the local wiring rules allow for this variation of
the requirements).
• If you are unsure about the installation, you should ask the local building authorities and look at the
by-laws.
• Make sure that the wall surfaces around the hob are heat-resistant and easy to clean (for example, use
ceramic tiles).
• Only a qualified electrician should make changes to the domestic wiring system.
WARNING!
• After the installation is complete, make sure that the user has no access to the electrical components.
• Make sure that the power cord cannot be reached through cupboard doors or drawers.
CAUTION!
• Adjacent and surrounding surfaces must be able to handle a temperature of 90 °C temperature.
• Make sure the glue that joins plastic or wooden material to the furniture can handle a temperature of at
least 150 °C to prevent the panelling from coming loose.
• The product should be installed so that heat can be radiated well to increase its reliability.
• Make sure that the furniture that the product will be mounted on can handle the weight after the cutting
operations are complete. For thin plates, provide suitable support parts to ensure the carrying capacity
and durability. Take the weight of the product into account, including any additional loads. The weight of
the product is on the label on the package.
• To prevent damage, the sandwich layer and adhesive must be heat resistant.
CAUTION!
• Do not install the hob directly above a dishwasher, fridge, freezer, washing machine or clothes dryer,
because the humidity may damage the hob electronics.
• Make sure that the power plug always is accessible so that the product can be disconnected from the
mains.
• After the installation is complete, the bottom surface and power cord of the hob are not accessible.
• Do not bend or compress the power cord. The power cord must be checked regularly and replaced by
authorised technicians when necessary.
Safety during operation
DANGER!
Risk of electric shock!
If the hob surface breaks, immediately disconnect the product from the mains to avoid possible electric
shock. Do not use the product.
Bekijk gratis de handleiding van Elvita CIH4332S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elvita |
| Model | CIH4332S |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 23134 MB |
