Elvita CDM2451X handleiding
Handleiding
Je bekijkt pagina 39 van 291
Installation - ENGLISH 39
1. Remove the cardboard box and cardboard packaging.
2. Remove the plastic packaging.
3. Remove the pieces of foam from the bottom.
4. Lift the product and remove the base packaging.
5. Remove the tape holding the door shut.
6. Remove the accessories from the upper basket.
7. Remove the styrofoam packaging from the baskets.
8. Remove the steel wire holding the spray arms in place.
9. Remove the cable tie holding the power cord, drain hose and water supply hose.
10. Verify that the spray arms and the baskets move freely.
WARNING!
Keep all packaging material well away from children. There is a risk of suffocation!
Connect the cold-water supply hose to a tap
CAUTION!
• If the water pipes are new or have not been used for an extended period of time, let the water run to
make sure that the water is clear. This precaution is necessary to avoid the risk of the water inlet
becoming blocked and damaging the dishwasher.
• If your sink has a spray jet fed by a hose that is connected to the same water line as the dishwasher, the
hose could burst. If your sink has one, it is recommended that the hose be disconnected and the hole
plugged.
Bekijk gratis de handleiding van Elvita CDM2451X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elvita |
| Model | CDM2451X |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 34272 MB |
