Elsner KNX WS1000 Style handleiding
Handleiding
Je bekijkt pagina 57 van 140
55 Automatic settings
Control System KNX WS1000 Style • Version: 28.05.2018 • Technical changes and errors excepted.
To change any of the time periods, press Timer.
3.3 Set timer
Press the button to set the indoor temperature above which the heating will be
switched on at night. The button is only active if a night mode operation period has
been set. Use the arrow buttons to change the value according to your wish. Default
setting: 16.0°C
Confirm your setting with the OK button.
The heating will engage as soon as the temperature drops below the set value and is
shut down again when the temperature is more than 0.5°C above the set value (hyster-
esis).
Press the button to enable or disable the switchover to automatic mode at a set point
in time, or following a manual intervention.
The general Automatic Reset occurs daily at the same time.
Switching on:
To set the heating to Automatic at a set point in time, select Yes (this is
the default setting).
Switching off:
To switch off the heating’s Reset function, select No.
Alternatively, the automatic function can be reactivated at a set time following a man-
ual intervention.
Switching on:
To perform an Automatic Reset after a manual intervention, select Yes.
Switching off:
To switch off the heating’s Reset function, select No (this is the default
setting).
Confirm your setting with the OK button.
Automatic Reset time and/or period can be set.
System > Automatic Settings > General Settings > Automatic Reset
3.3. Define automatic reset
3.1.9. Automatic air-conditioner settings
For connected coolings/air conditioners the following automatic settings can be
changed:
• Indoor sensor to be used for the air-conditioner
• Indoor day temperature
• Night mode (period) and indoor night temperature
• Enable/Disable automatic reset
Indoor Temp. Night
Automatic Reset
Bekijk gratis de handleiding van Elsner KNX WS1000 Style, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX WS1000 Style |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12479 MB |
