Elsner KNX WS1000 Style handleiding
Handleiding
Je bekijkt pagina 55 van 140
53 Automatic settings
Control System KNX WS1000 Style • Version: 28.05.2018 • Technical changes and errors excepted.
Press the button to set the indoor temperature above which the heating will be
switched on at night. The button is only active if a night mode operation period has
been set. Use the arrow buttons to change the value according to your wish. Default
setting: 9.0°C
Confirm your setting with the OK button.
Press the button to enable or disable the switchover to automatic mode at a set point
in time, or following a manual intervention.
The general Automatic Reset occurs daily at the same time.
Switching on:
To set the ventilation unit to Automatic at a set point in time, select Yes
(this is the default setting).
Switching off:
To switch off the ventilation unit’s Reset function, select No.
Alternatively, the automatic function can be reactivated at a set time following a man-
ual intervention.
Switching on:
To perform an Automatic Reset after a manual intervention, select Yes.
Switching off:
To switch off the ventilation unit’s Reset function, select No (this is the
default setting).
Confirm your setting with the OK button.
Automatic Reset time and/or period can be set.
System > Automatic Settings > General Settings > Automatic Reset
3.3. Define automatic reset
Ventilation modes wireless roof ventilator
Ventilation modes for WL400 and WL800:
Each time the OFF state is reached, the speed change stops automatically, so that a direct change be-
tween exhaust and circulation modes is impossible.
Indoor Temp. Night
Automatic Reset
For all ventilation units.
Ventilator
OFF
(stopped,
flap closed)
Exhaust air
0% ... 100%
Flap open
+
-
For circulation air
100% ... 0%
Flap open
Bekijk gratis de handleiding van Elsner KNX WS1000 Style, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX WS1000 Style |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12479 MB |
