Elsner KNX WS1000 Style handleiding
Handleiding
Je bekijkt pagina 54 van 140
52 Automatic settings
Control System KNX WS1000 Style • Version: 28.05.2018 • Technical changes and errors excepted.
Confirm your setting with the OK button.
Press the button to set the recirculating air function for heat recovery. Recirculation al-
lows heated air from the first area to be distributed in the entire room and so be used
for warming if required. In principle, the recirculation function only starts if the temper-
ature at the ventilator is at least 3° warmer than the indoor temperature.
Select Yes to activate the heat recovery function (with No, the function is switched off).
Use the arrow keys that appear to set the indoor temperature beneath which circula-
tion should take place, and the level at which the ventilator should run.
Default setting: Indoor temperature 10.0°C lower; with 30%.
Confirm your setting with the OK button.
Press the button to set the recirculating air function for condensation reduction. Recir-
culation of the air can reduce condensation forming on the window panes.
Select Yes to activate the condensation reduction function (with No, the function is
switched off). Using the arrow keys that appear, set the U-value of the glass used (ask
your window manufacturer or conservatory supplier for the value) and the level at
which the ventilator should run. Default setting: U-value 1.0; with 30%.
Confirm your setting with the OK button.
Press the button to set the indoor temperature above which the circulating air heating
will be switched on during the day. Until an indoor sensor is selected, the automatic
heating is deactivated. Use the arrow buttons to change the value according to your
wish. Default setting: 16.0 °C.
Confirm your setting with the OK button.
Press the button to set the night-time operation for the circulating air heating. Press
Select to select the time during which the night mode will operate. Activate one or
more periods on the list. The periods can be individually customised (see below).
Confirm your setting with the OK button.
To change any of the time periods, press Timer.
3.3. Set timer
Heat Recovery
Only for roof ventilators WL400/800.
Condensation
Only for roof ventilators WL400/800.
Temp. Heating
Only for fresh air/heating-combos on RF-VM.
Night mode
Only for fresh air/heating-combos on RF-VM.
Bekijk gratis de handleiding van Elsner KNX WS1000 Style, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX WS1000 Style |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12479 MB |
