Elsner KNX WS1000 Style handleiding
Handleiding
Je bekijkt pagina 38 van 140
36 Automatic settings
Control System KNX WS1000 Style • Version: 28.05.2018 • Technical changes and errors excepted.
are not frozen or the rails iced. When the shading is free, you can move the hangings
up by hand.
ATTENTION
Damage to property by moving frozen shades!
The drive and curtain can be damaged if a frozen outdoor shading
system is used.
•Before manually switching off the frost alarm, make sure that the
rails are not iced up.
Press the button to set the outdoor temperature block. The block only applies to auto-
matic operation; no shading occurs based on light intensity or the position of the sun.
Even when an outdoor blocking temperature is active, the drive will respond to wind
and rain alarms, as well as manual movement commands.
Please note that the shade rails or other mechanical components can remain iced even
when the outdoor temperature has already risen to a relatively high value.
ATTENTION
Damage to property by moving frozen shades!
The drive and curtain can be damaged if a frozen outdoor shading
system is used.
•Use the frost alarm function to provide reliable protection against
damage caused by icing.
Set temperature:
If the blind respectively the roller shutter should be blocked when the
outdoor temperature is low, set the value recommended by the manufacturer using the
arrow keys. Default setting: 5.0 °C. The block is countermanded again when the tem-
perature rises more than 2.0°C over the pre- set value (hysteresis).
Set the shade behavior in the next menu item.
Disable block
: If the blind respectively the roller shutter should be deployed to offer
shade regardless of the outdoor temperature, press the Off button.
Confirm your setting with the OK button.
Set the way in which the shade should behave when the outdoor temperature block is
triggered. The button is only active once an outdoor temperature has been set.
Retract:
If the shade should retract when the outdoor temperature falls below the set
value, select Yes (default setting). The shade is only retracted once the movement de-
lay time has elapsed.
Remain in current position:
If the shade should not move when the outdoor tempera-
Outdoor Temp.
Behavior
Bekijk gratis de handleiding van Elsner KNX WS1000 Style, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX WS1000 Style |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12479 MB |
