Elsner KNX VOC/TH-UP Touch weiß handleiding

Niet gecategoriseerd

Elsner

68 pagina's

PDF beschikbaar

Handleiding

44 Parameter setting

Sensor KNX VOC/TH-UP Touch • Version: 30.11.2021 • Technical changes and errors excepted.

8.10. Absolute humidity

The absolute air humidity value is detected by the KNX VOC/TH-UP Touch and can

be output to the bus.

8.11. Comfort field

The Sensor KNX VOC/TH-UP Touch can send a message to the bus if the limits of

the comfort field are exceeded. In this way, it is for example possible to monitor com-

pliance with DIN 1946 (standard values) or even to define your own comfort field.

Define the comfort field by specifying the minimum and maximum values for temper-

ature and humidity. The specified standard values comply with DIN 1946

Switching output sends on change and

periodically

Send switching output status

Switching output sends on change to 1

and periodically

if switching output = 1  send 1

Switching output sends on change to 0

and periodically

if switching output = 0  send 0

Use absolute humidity No • Yes

Sending pattern • never

• periodically

• on change

• on change and periodically

At and above change of

(if sent on change)

0,1 g • 0,2 g • 0,5 g • 1,0 g • 2,0 g • 5,0 g

Send cycle

(if sent periodically)

5 s • 10 s • 30 s… • 2 h

Use comfort field No • Yes

Sending pattern • never

• periodically

• on change

• on change and periodically

Send cycle (if sent periodically) 5 s • 10 s • 30 s… • 2 h

Maximum temperature in °C

(Standard 26°C)

25 ... 40; 26

Minimum temperature in °C

(Standard 20°C)

10 ... 21; 20

Maximum relative humidity in %

(Standard 65%)

52 ... 90; 65

Bekijk gratis de handleiding van Elsner KNX VOC/TH-UP Touch weiß, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.