Elsner KNX Touch One Style handleiding
Handleiding
Je bekijkt pagina 73 van 152
71 Adjustment
Room Controller KNX Touch One Style • Status: 30.07.2020 • Errors excepted. Subject to technical changes.
Use the arrow buttons to set the value from which the control system should identify
twilight and night. Pre-setting: 10 lx.
Night identification has a delay of one minute.
Confirm your setting using the OK button.
You can adjust the delay time for shading actuation. The movement delay prevents the
solar protection system from continuously extending and retracting in the event of rap-
id changes in lighting conditions.
The brightness must remain uninterrupted above the brightness value set for solar
protection for a set delay time (e. g. 1 minute) before the blind will extend. The bright-
ness must remain continuously below the value during the set retraction delay time
(e. g. 12 minutes) before the blind will retract again. This allows passing clouds to be
“blended out”, while the shading can still react rapidly to the sun.
Use the arrow buttons to set the values for the extension and retraction delays. Pre-
setting: Extension 1 minute, retraction 12 minutes.
Confirm your setting using the OK button.
The night-time re-cooling function using the windows and ventilation equipment is ac-
tivated once a set external temperature is exceeded for an defined period of time. The
window(s) and ventilator(s) which are used for the night-time re-cooling, as well as the
time period over which these are activated, can be set in the automatic operation func-
tions for the individual windows and ventilators.
You can use the arrow buttons to activate night-time re-cooling and set the external
temperature which must be exceeded for the cooling to start (e.g. higher than 10 °C).
You can also set the time period within which the external temperature must remain
above the minimum temperature (e.g. longer than 48 hours).
Confirm your setting using the OK button.
The frost alarm for shading elements and windows will be active when during or after
precipitation the outdoor temperature falls below a defined level.
You adjust which blinds will be retracted and which windows will be closed in the au-
tomatic functions for the individual blinds and windows.
Twilight
Movement delays
Night-time cooling
Frost alarm
Bekijk gratis de handleiding van Elsner KNX Touch One Style, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX Touch One Style |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14877 MB |
