Elsner KNX Touch One Style handleiding
Handleiding
Je bekijkt pagina 53 van 152
51 Operation
Room Controller KNX Touch One Style • Status: 30.07.2020 • Errors excepted. Subject to technical changes.
If the object function “Input Extended/Brief” is assigned to the up/down buttons, a long
and a short button press are executed as follows:
By pushing the button (shorter than adjustable time 1) the drive will be positioned (and
stopped) incrementally.
If the drive is to be moved a bit farther, then a little longer push is needed (longer than
time 1 but shorter than time 1+2). The drive stops immediately when releasing the but-
ton.
If the drive must be moved independently into the end position, the button is released
only after times 1 and 2 have expired. The move can be stopped by briefly pushing.
4.3.1. Input keyboard for names and codes
An input keyboard for names and codes will appear in certain menus. Words can be
typed in normally.
Special buttons:
Point in time 0: Push of button, start of time 1
Release before time 1 expired: step (or stop if drive is moving)
Point in time 1: End of time 1, start of time 2
Moving command
Release after time 1 expired
but before time 2 expires: Stop
Release after time 1 + 2 expired: Move into end position
Time 1 Time 2
01 1 + 2
Fig. 1
Time interval comfort mode diagram
Selects the alphabetical and numeric input keyboard.
ABC
Selects the symbols and special character input keyboard.
&
Delete. Deletes the preceding characters.
Shift key. Switches between upper and lower case letters.
Moves the cursor/caret one character to the left/right.
Bekijk gratis de handleiding van Elsner KNX Touch One Style, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX Touch One Style |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14877 MB |
