Elsner Corlo Touch KNX handleiding
Handleiding
Je bekijkt pagina 14 van 148
12 Description
Display Corlo Touch KNX • Status: 30.08.2021 • Technical changes and errors reserved.
When using a dual or triple frame, two or three sockets with a separation of 71 mm
must be placed accordingly. The frames must be installed vertically.
Overall dimensions with frame:
Single, approx. 80 mm x 81 mm (W x H),
Dual, approx. 80 mm x 153 mm (W x H),
Triple, approx. 80 mm x 224 mm (W x H),
Mounting depth approx. 12.5 mm
Assembling the frame and the display unit
The instructions show installation of display unit with a single frame. Dual and triple
frames are installed accordingly.
Fig. 1: Sectional drawing.
The Display Corlo Touch KNX fits in a standard
junction box (Ø 60 mm, depth 42 mm).
If the analog/digital inputs are used, a deep socket (60
mm) or an electronics socket should be used. In this way,
cables can be connected and stowed more conveniently.
Fig. 2
A socket with 4 screw domes faciliates installation.
Fig. 3
Bolt the frame on to the socket. Two screws (right/left or
top/bottom) are enough.
Bekijk gratis de handleiding van Elsner Corlo Touch KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Corlo Touch KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16939 MB |
