Elsner Corlo Touch KNX handleiding
Handleiding
Je bekijkt pagina 120 van 148
118 Automatic functions
Display Corlo Touch KNX • Status: 30.08.2021 • Technical changes and errors reserved.
5.4.3. Setting the window automation
Priorities in automatic window mode:
1. Alarm functions:
Alarm functions are used for windows in manual and in automatic mode. In case of
frost, wind or precipitation alarm, windows are closed and may not be opened
manually.
Similarly, the ventilation block closes windows (object no. 608 "Automatic status
cooling" = 1). They are then in automatic mode and can be immediately operated
manually again. The delay time for the ventilation block can be adjusted.
Ventilation lock, Page 105
2. Ventilation settings:
The settings are only executed if a window is in automatic mode and none of the alarm
functions named above is active.
Highest priority is granted to
timed closure, followed by
outdoor temperature blocks (keep closed),
timed ventilation (open),
supply air temperature block (keep closed) and
night-time re-cooling (open).
This means that e.g. timed ventilation or night-time re-cooling will only occur, when
the outdoor temperature exceeds the pre-set value for the outdoor temperature block.
Ventilation automation according to temperature, air humidity or CO
2
content is only
executed if no block applies.
Setting the window ventilation
Select "Transmit the following parameters: Yes" to render the modifications valid.
Previous settings are then overwritten - including modifications done on the display!
For the ventilation you may evaluate the indoor temperature, relative air humidity
and the CO
2
content of the air in the room.
Transfer the following parameters No • Yes
Use indoor temperature No • Yes
Open from (in 0.1°C)
only if ventilation based on indoor
temperature
(Hysteresis = 2°C)
50...400; 220
Use air humidity No • Yes
Bekijk gratis de handleiding van Elsner Corlo Touch KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Corlo Touch KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16939 MB |
